Art Pro Channel II Valve Recording Channel

£275.00
With free shipping

With Mic Pre, Compression, EQ and more


Temporarily out of stock

Due back in stock in 2-3 months

Email us - we'll check availability and reply asap.

Seen it cheaper? Tell us!

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: ART

Category: Recording & Playback

Details

Details

The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

The ART Pro Channel II 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels

Additional Info

Additional Info

Specification

Input Impedance

  • Mic: 150 to 3.4K Ohms, variable
  • Instrument: 2.5M Ohms
  • Preamp Insert: .5K Ohms

Output Impedance

  • Balanced Output: 600 Ohms balanced
  • Unbalanced Output: 300 Ohms
  • Insert Outputs: 300 Ohms

Frequency Response

  • Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
  • THD @ 1 KHz: <0.15% typical
  • THD @ to to 20 KHz: <0.033% typical

Equivalent Input Noise

  • Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
  • Instrument: -109 dBu, Input shortened, Max gain, "A" weighted

Maximum Input Level

  • Mic: +18dBu balanced
  • Instrument: +15 dBu

Maximum Gain

  • Mic: 70dB (XLR to balanced output)
  • instrument: 64 dB (1/4" to balanced output

Maximum Output Level

  • Balanced: +24 dBu
  • Unbalanced: +20 dBu
  • Output Level At Meter 0 VU: +4 dBu/-10dBV

Preamp

  • Microphone Gain: 0 dB to +56 dB
  • Instrument Gain: +3 dB to +50 dB
  • Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave

EQ

  • Boost/Cut: +/- 12 dB on each band
  • Low Freq. Tuning: 40 / 120 Hz Selectable
  • MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
  • MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
  • High Freq. Tuning: 6 KHz / 18 KHz Selectable

Compressor / Limiter

  • Attack Time: 250 uSec. to 100 mSec.
  • Release Time: 00 mSec to 3 Sec.
  • Compression Ratio: 2:1 to 30:1
  • Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
  • Dimensions (cm): 8.9 x 48.3 x 23.3
  • Weight (lbs/kg): 11/5
  • Power Requirements: USA - 105 to 125 VAC/ 60 Hz
  • Export units configured for country of destination.

Note: 0 dBu = 0.775 VRMS, 0 dBV = 1 VRMS

Manufacturer's Part Number PROCHANNEL-2
Manufacturer ART
also known as ART Pro Cahnnel-II, ART Pro Channel-2, ART ProChannel II
Call for Price N/A