Intellijel 7U Performance case with TPS80 Power

£469.00
With free shipping
Two 84 hp rows (6U) of Eurorack module space & One 84 hp row for our 1U modules.

Preorder now

Due back in stock in TBC

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: Intellijel Designs

Category: Keyboards & Synths

*Note that the price is based on when we previously had this product in stock. When placing an order for an item temporarily out of stock, in most cases the price will remain the same, however occasionally the price may be subject to change. If this is the case then we'll tell you straight away and offer a refund.

Details

Details

Features

  • Two 84 hp rows (6U) of Eurorack module space.
  • One 84 hp row for our 1U modules.
  • Threaded M3 strips for mounting modules.
  • High spec TPS80 power supply capable of powering up to 20 modules with +12 V output at 3000 mA, -12 V output at 3000 mA and +5 V output at 1500 mA

Construction:

  • Solid plastic carrying handle.
  • Detachable nylon carrying strap.
  • Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
  • Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
  • Plastic feet for resting the case on the table.
  • Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
  • Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.

Rear panel:

  • Four 1/4″ audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
  • MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
  • USB port that connects to the µMIDI 1U and other future modules.
  • Rocker switch and barrel plug for power entry.

Additional Info

Additional Info

Specification

Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board:  53 mm

  • Outside dimensions with lid:  312 mm x 165 mm x 445 mm
  • Outside dimensions without lid: 312 mm x 83 mm x 445 mm
  • Weight: 3.8 kg with lid, 4.3 kg with lid and power adapter
  • Power: TPS80 +12 V output at 3000 mA, -12 V output at 3000 mA, +5 V output at 1500 mA