Kiwi Technics Patch Editor Hardware Paramter Editor

With free shipping

Works with many Roland, Oberheim, Waldorf, Moog and other synths

Guaranteed In Stock!

Order by 3:30pm and we’ll ship it today!

Seen it cheaper? Tell us!

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: Kiwi Technics

Category: Keyboards & Synths



The Patch Editor has been designed for easy parameter editing for many of the older keyboards with easy to use controls for every synth type. Every active control will light up to make fast changes simple and buttons are colour coded depending which state is active. Each control that is changed will clearly identify itself on the display.

There was a stage when most of the keyboards manufactures went though a process of removing all the knobs and replacing them with a parameter driven system. Anyone who has used one will know how difficult it is to use, especially live. When the complaints started arriving some started making plug in patch editors. The problem with these is they only worked on one type of keyboard and were (and still are) expensive and rare.

The 'Patch Editor' can be used in place of a PG-300 or MPG-80 as well as handle midi control of midi and sysex capable keyboards.

It includes an internet update system for software changes or new keyboards support, and includes an external input that can be mapped to any continuous control and all the active controls light up to make it easy to use. Each control in each synth is kept in lookup tables. This approach has made the Patch Editor very versatile and flexible.

Note - The Power Pack is not included - The plug required for power connection is a DC style 2.5mm ID, 5.5mm OD and 10-14mm shaft length with positive on the inside.Power supply required is 9-12vDC with a minimum of 500mA and the Patch Editor has reverse polarity protection built in. 9vDC @ 500mA is the preferred supply voltage.

Some of the features are:

  • Can translate midiCC to the currently selected patch. This will allow any synth to be controlled via midiCC for software that does not support sysex. One midiCC command for filter cutoff adjust, for instance, will output the correct codes for filter cutoff adjust for any selected synth.
  • Can control both the Upper & Lower Tone boards in the MKS-70 & MKS-80 from the Patch Editor directly separately or combined. Note, the MKS-70 needs the latest system ROM (v1.08).
  • Every control identifies itself and it's value on the display in real time. This is important when unused controls are reassigned as is done in some synth types.
  • Each synth type has a separate synth midi channel which is remembered. The Patch Editor also has a midi channel for it's own midiCC control.
  • All switch positions are remembered for each synth type.
  • The ext input allows control of any one variable parameter from an external voltage source. For example a foot pedal could be used to control the filter cut off much like a waa waa pedal might.
  • The control lights can be dimmed to suit current light levels.
  • Top quality components have been used throughout. This has added to the price but you get something that will work well when it is supposed to and will last.

Additional Info

Additional Info


Currently Supports

  • Cheetah MS6(7)
  • Fender Chroma Polaris
  • Kawai K3m
  • Korg DSS-1,DSM-1,DW-6000(1), DW-8000/EX-8000, M1
  • KiwiTechnics Kiwi3P Upgrade KiwiTechnics KiwiSix Upgrade Kiwitechnics Kiwi-106 Upgrade
  • MKS-30 JH Midi Mod(3)
  • Juno 1, 2, 106, MKS-7, MKS-50, MKS-70(4)
  • Roland MKS-80, JX-8P(5), JX-10(6)
  • Oberheim Matrix 6 & 6R(9), Oberheim Matrix 1000(9)
  • Organix 3P Midi Upgrade
  • Sequential Circuits SixTrak, Max(7)
  • Studio Electronics ATC/X(10)
  • Waldorf Pulse, Q/Q+ MicroQ(10), MicroWave I (OS2)(10)
  • Moog Slim & Little Phatty
  • MidiCC to Sysex translation
Manufacturer's Part Number KIWI-PATCH-EDITOR
Manufacturer Kiwi Technics
also known as No
Call for Price N/A