Moog Music Minitaur Analogue Bass Synthesizer

£589.00

Signature (massive!) Moog bass in a compact format. Earth shuddering Bass in the house!

  • Pure Analog Mono Bass Synthesizer
  • Full MIDI and CV Control
  • One Knob Per-Function Interface

Notify me when this product is available:

The Minitaur is an inconspicuously compact, subharmonic bass synthesizer designed to effortlessly integrate into any performance and computer-based music solution.

Just as its progenitors, the Minitaur effortlessly does one thing above all others… wall splitting analog BASS.

Wall-splitting bass that fits in your backpack:

  • Seamless DAW Integration
    Unlock a new world of sonic possibilities and control with the free Minitaur Editor software
  • Store and recall 128 presets
    Select and save presets directly from your Minitaur’s front panel, with a MIDI controller or via the free Minitaur Editor.
  • More than meets the eye
    Access 6 Modulation sources, Hard Sync, ADSR Envelopes, CV to MIDI conversion and more.

For over 40 years, the Moog Taurus has been the secret weapon of artists and producers around the globe for generating earth-shaking bass.

The Minitaur is the newest addition to the Taurus family of Analog Bass Synthesizers. It is an inconspicuously compact, subharmonic bass machine designed to integrate seamlessly into any performance or computer-based music workflow . Just as its progenitors, the Minitaur effortlessly does one thing above all others… wall splitting analog BASS.

The solid steel enclosure of the Minitaur is deceptively simple - offering immediate access to critical sound design and performance controls only. This makes Minitaur extremely fast and easy to use--but just under the surface lies a vast expanse of dynamic and inspirational power that is instantly accessible from almost any laptop or MIDI controller.

The free Minitaur Editor software truly unlocks Minitaur’s power and flexibility by making DAW integration and control completely seamless on both Mac and Windows machines. Load and save up to 128 presets onto your Minitaur, select from 6 different modulation waveshapes , engage Hard Sync, access full ADSR envelopes, MIDI sync the LFO, reset oscillator waveform cycles, polychain with other Moog synthesizers and more. Every feature can be manipulated, automated and recalled instantly.

Front Panel Controls:

•VCO2 Frequency – Sets the frequency offset of VCO2 from VCO1 from -1 Octave to +1 Octave. Center is unison with VCO1.

•Oscillator 1 & 2 Saw/Square Waveform Selector – Selects a Sawtooth wave (LED OFF) or Square wave (LED ON) Signal for VCO1 and 2.

•VCO1 Level – Sets the level of VCO1

•VCO2 Level – Sets the level of VCO2

•VCF Cutoff – Sets the Cutoff Frequency of the 4-pole Moog Lowpass VCF from 20Hz to 20KHz

•VCF Resonance – This sets the gain for the amount of signal from the output of the VCF fed back to the input of the VCF. This creates a peak in Frequency response at the Cutoff Frequency that can be increased all the way to self-oscillation.

•VCF EG Amount – Bi-polar control sets the (+) or (-) Amount of Envelope Generator modulation of the VCF. Center is no Envelope Generator modulation.

•LFO Rate – Sets the frequency of the LFO. Range is from 0.01Hz to 100Hz

•LFO VCO Amount – Sets the Amount that the LFO modulates the VCO

•LFO VCF Amount – Sets the Amount that the LFO modulates VCF

•VCA EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds.

•VCA EG Decay/Release – Sets both the decay time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

•VCA EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA.

•VCF EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds.

•VCF EG Decay/Release – Sets both the decay Time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

•VCF EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF.

•Release On/Off Switch – Enables (LED On_ or Disables (LED Off) the Release segments of both Envelope Generators.

•Glide On/Off Switch – Enables/ Disables the Glide function

•Glide – Sets the rate of Glide when the note controlling the MINITAUR changes.

•Volume – The Master Volume of the MINITAUR’s synth Engine.

•Fine Tune – Adjusts the frequency of the VCOs +/- 1 semitone.

•MIDI Indicator LED – Indicates incoming MIDI activity

•LFO Rate Indicator LED – Indicates the rate of the LFO.

Back Panel:

•Audio Out – 1/4" Unbalanced jack.

•Headphones -- Jack for stereo headphone output.

•Audio In – 1/4" Unbalanced jack accepts line-level input.

Analog CV Inputs:

•Pitch CV – 1/4" TRS Jack accepts 0 to +5V signal (internally processed for 1 V/Octave) via passive Expression Pedals or CVs.

•Filter CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

•Volume CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

•Gate – 1/4" Jack accepts a 0 (Off)/ +5V(On) Gate signal to trigger the unit’s EGs.

MIDI:

•MIDI (DIN) – Standard DIN MIDI input for MIDI Control of the MINITAUR

•MIDI (USB) – Type B USB connector for connecting MINITAUR to host for USB MIDI.

,

Front Panel Controls:

•VCO2 Frequency – Sets the frequency offset of VCO2 from VCO1 from -1 Octave to +1 Octave. Center is unison with VCO1.

•Oscillator 1 & 2 Saw/Square Waveform Selector – Selects a Sawtooth wave (LED OFF) or Square wave (LED ON) Signal for VCO1 and 2.  

•VCO1 Level – Sets the level of VCO1

•VCO2 Level – Sets the level of VCO2

•VCF Cutoff – Sets the Cutoff Frequency of the 4-pole Moog Lowpass VCF from 20Hz to 20KHz 

•VCF Resonance – This sets the gain for the amount of signal from the output of the VCF fed back to the input of the VCF. This creates a peak in Frequency response at the Cutoff Frequency that can be increased all the way to self-oscillation.

•VCF EG Amount – Bi-polar control sets the (+) or (-) Amount of Envelope Generator modulation of the VCF. Center is no Envelope Generator modulation.

•LFO Rate – Sets the frequency of the LFO. Range is from 0.01Hz to 100Hz

•LFO VCO Amount – Sets the Amount that the LFO modulates the VCO

•LFO VCF Amount – Sets the Amount that the LFO modulates VCF

•VCA EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds.

•VCA EG Decay/Release – Sets both the decay time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

•VCA EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCA.

•VCF EG Attack – Sets the attack Time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds.

•VCF EG Decay/Release – Sets both the decay Time to the sustain level and release time of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF. Time ranges from 1 msec to 30 seconds. The Release segment of the EG is enabled by the Release On/Off switch.

•VCF EG Sustain – Sets the sustain level of a Minimoog-Style ADSR Envelope Generator used to modulate the VCF.

•Release On/Off Switch – Enables (LED On_ or Disables (LED Off) the Release segments of both Envelope Generators.

•Glide On/Off Switch – Enables/ Disables the Glide function

•Glide – Sets the rate of Glide when the note controlling the MINITAUR changes.

•Volume – The Master Volume of the MINITAUR’s synth Engine.

•Fine Tune – Adjusts the frequency of the VCOs +/- 1 semitone.

•MIDI Indicator LED – Indicates incoming MIDI activity

•LFO Rate Indicator LED – Indicates the rate of the LFO.

Back Panel:

•Audio Out – 1/4" Unbalanced jack.

•Headphones -- Jack for stereo headphone output.

•Audio In – 1/4" Unbalanced jack accepts  line-level input.

Analog CV Inputs:

•Pitch CV – 1/4" TRS Jack accepts 0 to +5V signal (internally processed for 1 V/Octave) via passive Expression Pedals or CVs.

•Filter CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

•Volume CV – 1/4" TRS Jack accepts 0 to +5Vsignal via passive Expression Pedals or CVs.

•Gate – 1/4" Jack accepts a 0 (Off)/ +5V(On) Gate signal to trigger the unit’s EGs.

MIDI:

•MIDI (DIN) – Standard DIN MIDI input for MIDI Control of the MINITAUR

•MIDI (USB) – Type B USB connector for connecting MINITAUR to host for USB MIDI.


 
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist

Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page