Presonus ADL700 High Voltage Valve Channel Strip

With free shipping

With ADL600 Preamp, Comperssion, EQ

Guaranteed In Stock!

Order by 3:30pm and we’ll ship it today!

Seen it cheaper? Tell us!

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: Presonus

Category: Recording & Playback



Stunning high-end sound and incredible versatility are hallmarks of this top-of-the-line, tube-driven channel strip. The ADL 700 integrates a proven, award-winning, boutique-quality preamp; a custom-designed FET compressor; and a custom, four-band, semi-parametric EQ.

Beyond superb sound quality, the ADL 700’s preamp is special because of its ease of use and flexibility.

Among the hallmark features of ADL-series preamps are separate, balanced XLR mic, balanced XLR line, and ¼” TS instrument inputs and a single, balanced XLR output. An Input Source Select switch enables you to leave your signal sources connected at all times and choose among sources, patching the selected input through the signal chain and completely bypassing the other two inputs.

The preamp offers a choice of four mic-input impedances: 1500Ω, 900Ω, 300Ω, and 150Ω. Lowering or raising the ADL 700 mic-input impedance can create subtle coloring and filtering effects, enabling you to get a wider variety of tonalities without using the EQ.

In addition, the ADL 700 provides variable mic-input gain, employing an 8-position, military-grade, rotary switch that provides 35 dB of gain in stepped, 5 dB increments. A Trim potentiometer (±30 dB) allows you to make fine adjustments to the final preamp stage of the ADL 700 input.

The output stage is controlled by a fully variable attenuator that delivers ±10 dB of fine-tune trim adjustment, enabling you to dial in the perfect gain structure for any application.

The ADL 700’s FET (Field-Effect Transistor) compressor includes fully variable attack, release, threshold, ratio, makeup gain, and bypass controls. The compressors of two ADL 700s can be stereo linked allowing for more accurate stereo imaging. The ADL 700 compressor has a “soft knee” compression curve.

The ADL 700’s 4-band semi-parametric EQ was designed to match the preamp and compressor. It combines isolated filters and optimized, per-band Q to provide subtle signal-shaping without harsh artifacts.


  • 1 unbalanced ¼” instrument input (front panel)
  • 1 transformer-balanced XLR line input
  • 1 transformer-balanced XLR mic input
  • 1 transformer-balanced XLR line output

Tube preamp

  • High-voltage, all-tube, Class A, dual-transformer design with one 12AT7 and two 6922 vacuum tubes
  • Input-source select switch
  • Variable microphone input impedance (150, 300, 900, 1,500Ω)
  • 8-position Gain switch
  • Variable Trim adjustment for final stage

Fully variable FET compressor

  • Attack, release, threshold, ratio, makeup gain
  • Bypass switch
  • Stereo link

Four-band, semi-parametric EQ with bypass

  • Two peak mid bands
  • High and low bands switchable peak/shelving
  • Overlapping frequency ranges
  • Fixed Q (0.55)
  • Switchable pre-/post-compressor
  • Bypass switch

    Meters, Controls, and Other Features

    • Ultra-low noise (-100 dB S/N ratio) and high gain (>73 dB gain)
    • Dual-mode analog VU metering (output and gain reduction)
    • -6 dB meter-offset switch (for metering hot signals)
    • Variable high-pass filter (20, 40, 80, 200 Hz)
    • 48V phantom power
    • Polarity-invert switch
    • -20 dB pad


    • 2U 19” rack-mountable, rugged steel chassis
    • Internal power supply with standard IEC connector
    • Chassis-ground link connectors (lift chassis ground)

Additional Info

Additional Info


Input Impedance

  • Microphone Selectable, 150/300/900/1500Ω
  • Balanced Line 2 kΩ
  • Instrument 1 MΩ
  • Maximum Input Level

    • Microphone (1500Ω, +20 dB Pad out) +10 dBu
    • Microphone (1500Ω, +20 dB Pad in) +30 dBu
    • Balanced Line +30 dBu
    • Instrument +20 dBu

    Gain Range

    • Microphone (1500Ω, +20 dB Pad out) +6 dB to +70 dB
    • Balanced Line -20 dB to +40 dB
    • Instrument -20 dB to +40 dB
      • Performance

        • Noise Floor (all inputs, minimum gain) -95 dBu (A-weighted)
        • Microphone Equivalent Input Noise (EIN) -123 dBu (A-weighted)
        • Frequency Response 10 Hz to 45 kHz, ±1 dB
        • Maximum Output Level +28 dBu (@ 0.5%THD+N)
        • Output Impedance 50Ω
        • Tube Complement (per channel) (1) 12AT7A and (2) 6922


        • Type 2nd-order shelving filter
        • Q 0.55
        • Low Band (Low-pass or Bandpass) 20 Hz to 250 Hz, ±16 dB
        • Low-Mid Band 160 Hz to 2 kHz, ±16 dB
        • High-Mid Band 800 Hz to 8 kHz, ±16 dB
        • High Band (High-pass or Bandpass) 2 kHz to 20 kHz, ±16 dB


        • Threshold Range -20 dBu to +30 dBu
        • Ratio 1:1 to 4:1
        • Attack Time Fast (0.5 ms) to Slow (10 ms)
        • Release Time Fast (30 ms) to Slow (500 ms)
        • Curve Type Soft knee


        • Internal supply, standard IEC connector 115 or 230 VAC / 100W


        • Dimensions 2U rackmount
        • Height 3.5” (88.9 mm)
        • Depth 17" (431.8 mm)
        • Width 19” (482.6 mm)
        • Weight 22.75 lb. (10.32 kg)
    Manufacturer's Part Number ADL700
    Manufacturer Presonus
    also known as Presonus ADL 700, Presonus ADL-700 Channel Strip
    Call for Price N/A