Radial StageBug™ SB-1 Active Acoustic DI

Was £79.00

Special Price £71.10

With free shipping

Active direct box made for players that are on the move.

Temporarily out of stock

Due back in stock in 2-3 months

Email us - we'll check availability and reply asap.

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: Radial

Category: Recording & Playback

Details

Details

The Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don't let the small size deter... this ultra-compact StageBug sounds absolutely terrific!

The design begins with standard ¼" instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility to noise, buffers it and then balances the signal for long runs to the PA system. And with 48 volt phantom powering, the SB-1 does not require batteries or external supply to make it work. You simply plug in and you are set to go!

The active circuit features a carefully selected 220k-ohm input impedance to eliminate problems with loading while delivering a smooth, warm sound to the audio system. This is particularly important when interfacing vintage guitars with low output pickups when should you plan to do some recording or Reamping. The SB-1 is also equipped with a -15dB pad that reduces the input sensitivity to gracefully handle even the loudest instruments. This makes the SB-1 perfectly well suited for electric bass and keyboards. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low frequency resonance.

The StageBug... small size, big heart, huge sound!

Additional Info

Additional Info

Specification
Specifications     
Audio circuit type:  Active Buffer with Phase Splitter
Frequency response:  20Hz to 20KHz
Total harmonic distortion:  <0.006%
Dynamic range:  >100db
Input impedance:  800K/23K
Maximum input:  +2dbu/+8dbu
Gain:  +1.3dbu/+4.4db
Clip Level - Output  +3.3dbu/+12.3dbu
Output impedance: 330 Ohms
Equivalent input noise:  -101dbu
Noise floor: -97dbu
Intermodulation distortion: <0.01%
Phase deviation: 25/12 degrees Maximum
Features   
Switches:  Pad, Phase
Merge function:  Automatic
Input pad:  -12db
Polarity: Yes
XLR configuration:  + = Pin 2, - = Pin 3, Ground = Pin 1 
General   
Construction:  16 gauge steel chassis & outer shell
Finish: Baked enamel
Size:  (L x W x D) 4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
Weight:  0.55 lbs (250 grams)
Shipping size: (L x W x D) 8.25" x 5" x 1.75" (210mm x 127mm x 44mm)
Shipping weight: 0.8 lbs (365 grams)
Power:  48V phantom power
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.
Manufacturer's Part Number R800 0110
Manufacturer Radial
also known as Radial StageBug SB-1 Active Acoustic direct Box, Radial Engineering SB-1 Acoustic Compact Active DI For Acoustic Guitar, Radial SB1 DI Box
Call for Price N/A