Our Glasgow shop is currently closed – we are still here to help and you can get in touch by email or phone

Doepfer Dark Time Analogue Step Sequencer w/ MIDI & USB

£429.00
With free UK shipping

Classic 2x8 CV/Gate / MIDI / USB analogue sequencer


Guaranteed In Stock!

Seen it cheaper? Tell us!

Order by phone on: 0141 221 9650

14 Day Money Back Guarantee! See our returns policy.

Manufacturer: Doepfer

Category: Eurorack

Details

Details

Dark Time is an 2 x8 steps analog sequencer with CV/Gate, USB and Midi interface. It is planned in the first place as an add-on for the Dark Energy but may be used even in combination with other Midi, USB or CV/Gate Default too.

Features:

Red LEDs
Analogue
2 Rows each with 8 potentiometers
1 Knob for each step, 1 LED
Switch On/Off/Skip and switch Stop/Continue/Jump
Modes of operation: 1x 16 (the two rows run in sequence, 2x 8 (rows run in parallel), and custom
Different directions
Three voltage/tone ranges selectable
Quantisation
Transposer
Analogue interface for CV/Gate/Clock/Reset/Start-Stop In and Out (3.5mm jack sockets)
Control either internally via integrated clock oscillator with frequency and pulse width control
Externally via Midi/USB
Externally (via Analogue Clock/Start/Stop) or rocker switch with 3 positions
MIDI in/out
USB connector
Powered via power supply 12V AC / min. 400 mA

Specifications

Specifications

Specification

 

Additional remarks and specs:

  • for devices with S-Trigger inputs (e.g. Moog) or the Korg synthesizers MS-10/MS-20 a special S-Trig cable is required to connect the gate output of the Dark Time to the Gate/S-Trig input of the synth.

  • Distance between the knobs (center - center): ~ 25 mm, diameter of the knobs: ~ 16 mm

  • Distance between the toggle switches (center - center): ~ 12.5 mm

  • Distance between knobs and switches (center - center): ~ 20 mm

  • The metal case is made of 1 mm steel, black coated with white printing

  • Overall dimensions: about 248 x 145 x 75 mm

  • Dimension of the metal case only (without side plates and knobs): about 223 x 135 x 55 mm

  • Side plates dimensions: about 145 x 65 x 12.5 mm

  • Weight: about 1.5 kg (without power supply)

  • The wooden side plates can be removed if desired. They are mounted by means of two screws to the metal box. The holes in the metal box can be used also to mount several devices together (e.g. with common wooden side plates on both ends) or to mount the Dark Time to one or two Dark Energy

  • The device can be positioned horizontal (desk top) or vertical

  • These parts are included: power supply (12V AC/min. 400mA) for 230V mains voltage with European mains plug, one USB cable (type A-B, 2 m length) and four A-100 patch cables (two 50 cm length and two 80 cm length)

  • Powering the device via USB is not possible, because the analog circuits require a dual voltage (+/-12V).