SL3KT (pronounced "Select") is a simple three-channel switch module for Eurorack Modular Synthesizers.
Three independent, two-way switches allow for users two select between different sources or destinations of both CV and Audio Signals. Useful for many tasks in a Eurorack system such as sequence selecting, CV selecting, boolean logic operations, group switching, group routing, gating, waveform mixing, and so much more!
Features:
- LED: Indicates the current switch
routing. The LED will be green if
A is connected to IN/OUT. The LED
will be red if B is connected to IN/
OUT.
- SWITCH: Manual selection of the
switch routing. Also inverts the
logic of the CV input.
- CV: Voltage controlled selection of
the switch routing. 3V schmitt
triggered gate-high input.
SUGGESTED PATCHES:
Sequence Switch:
Patch the gate and v/Oct from
from sequence A into the A
jacks of switch 1 and 2, Patch
the signals from sequence B into
the B inputs. Flipping the first
switch will change both switches
simultaneously.
Boolean Logic:
INVERT - Patch a voltage offset
into the A side of one switch. Patch
the gate you would like to invert
into CV.
AND - Patch gate one into B. Patch
gate two into CV.
OR - Patch gate one into A. Patch
gate two into B and CV.
Waveform Mixer:
Put two waveforms from the same
osc into A and B. Place the pulse out
from the same oscillator into CV.
Listen to IN/OUT.
